Brasses are alloys of Copper and Zinc. They may also contain small amounts of other alloying elements to impart advantageous properties. Brasses have high corrosion resistance and high tensile strength. They are also suited to fabrication by hot forging. Free machining grades of brass set the standard for machining by which other metals are compared.
Brasses are divided into two classes. The alpha alloys, with less than 37% Zinc, and the alpha/beta alloys with 37-45% zinc. Alpha alloys are ductile and can be cold worked. Alpha/beta or duplex alloys have limited cold ductility and are harder and stronger. CZ114 /CW721R is a duplex or alpha/beta alloy.
Brass alloy CZ114/CW721R is a versatile high strength, hot workable, machinable engineering alloy sometimes referred to as a Manganese Bronze or High Tensile Brass.
Applications
CZ114 / CW721R is typically used in:
~ Architectural applications
~ High strength components
~ Valves
~ Valve stems
~ Fittings
~ Marine fittings
Alloy Designations
CW721R/CZ114 Brass corresponds to the following designations:
UNS C67500
CZ114 is also sometimes called Manganese Bronze.
Corrosion Resistance
The addition of Tin to the composition of CZ114/CW721R increases this alloys’ resistance to corrosion in marine and mildly acidic environments.
Cold Working
CZ114/CW721R has a poor rating for cold working.
Hot Working
Hot working of CZ114/CW721R is excellent.
The hot forgeability rating is very good, rated at 80 compared to forging brass which rated as 100. The recommended hot working temperature for this alloy is between 625 and 750°C.
Heat Treatment
The annealing temperature of CZ114/CW721R is between 425°C and 600°C.
Machinability
CZ114/CW721R has a poor machinability rating of 30 compared to Brass CZ121/CW614N which is rated as 100.
Weldability
Soldering and brazing of CZ114/CW721R are rated as excellent.
Oxyacetylene welding, butt welding and spot welding are rated as good.
Gas shielded arc welding and seam welding are rated as fair.
Coated metal arc welding is not recommended.
This Data is indicative only and must not be seen as a substitute for the full specification from which it is drawn. In particular, the mechanical property requirements vary widely with temper, product and product dimensions. The information is based on our present knowledge and is given in good faith. However, no liability will be accepted by the Company is respect of any action taken by any third party in reliance thereon.
As the products detailed may be used for a wide variety of purposes and as the Company has no control over their use; the Company specifically excludes all conditions or warranties expressed or implied by statute or otherwise as to dimensions, properties and/or fitness for any particular purpose.
Any advice given by the Company to any third party is given for that party’s assistance only and without liability on the part of the Company. Any contract between the Company and a customer will be subject to the company’s Conditions of Sale. The extent of the Company’s liabilities to any customer is clearly set out in those Conditions; a copy of which is available on request.